How to Fix a Broken Recliner Pull Handle
A broken recliner pull handle can ruin your relaxation time. A recliner is all about comfort, and when it breaks, it feels like a small disaster. But don’t worry. Fixing a broken pull handle is a simple DIY job that you can handle with just a few tools and some patience. Here’s how to get your recliner back in shape.
1. Gather Your Tools
Make sure you have the right tools before you start:
A screwdriver set (flathead and Phillips)
Pliers
A wrench (if needed for your recliner)
A replacement pull handle (measure the old one if necessary)
Fabric or upholstery tape (for extra reinforcement)
2. Inspect the Damage
Look at the broken pull handle closely. Figure out whether the problem is with the handle itself or the mechanism. Sometimes, a loose screw or worn plastic is all that's wrong. If the damage is minor, you might not need to replace the whole handle.
3. Remove the Old Handle
Unscrew any fasteners holding the handle in place. Depending on your recliner, you might need to remove screws from the side or bottom. Use your screwdriver and pliers to loosen any stubborn screws. Be careful around the fabric to avoid damaging it.
4. Check the Mechanism
After removing the old handle, inspect the mechanism. Clean any dirt or debris that might be causing the problem. If you see any worn-out parts, replace them to avoid future issues.
5. Attach the New Handle
Position the new pull handle and align the screws. Use your screwdriver to secure it in place, but don’t overtighten the screws. Tightening too much could strip the threads or damage the fabric.
6. Test the Recliner
Before fully reassembling the chair, test the new pull handle. Sit in the recliner and try reclining. Make sure everything moves smoothly. If you notice resistance or odd sounds, check for loose screws or misaligned parts.
7. Reassemble and Enjoy
Once the handle works, put the chair back together. Replace any padding or covers you removed. Make sure everything looks and feels right.
8. Optional: Add Extra Protection
If your recliner is prone to wear, add some fabric or upholstery tape. It can cover scratches and worn areas, giving your chair extra durability.
Conclusion
Fixing a broken recliner pull handle is easier than you think. With the right tools and a bit of patience, you can handle the repair yourself. You’ll save money on professional fees and feel accomplished in bringing your recliner back to life. Now, sit back, relax, and enjoy your fully functional recliner!
For more services or product details, please contact us
1. Gather Your Tools
Make sure you have the right tools before you start:
A screwdriver set (flathead and Phillips)
Pliers
A wrench (if needed for your recliner)
A replacement pull handle (measure the old one if necessary)
Fabric or upholstery tape (for extra reinforcement)
2. Inspect the Damage
Look at the broken pull handle closely. Figure out whether the problem is with the handle itself or the mechanism. Sometimes, a loose screw or worn plastic is all that's wrong. If the damage is minor, you might not need to replace the whole handle.
3. Remove the Old Handle
Unscrew any fasteners holding the handle in place. Depending on your recliner, you might need to remove screws from the side or bottom. Use your screwdriver and pliers to loosen any stubborn screws. Be careful around the fabric to avoid damaging it.
4. Check the Mechanism
After removing the old handle, inspect the mechanism. Clean any dirt or debris that might be causing the problem. If you see any worn-out parts, replace them to avoid future issues.
5. Attach the New Handle
Position the new pull handle and align the screws. Use your screwdriver to secure it in place, but don’t overtighten the screws. Tightening too much could strip the threads or damage the fabric.
6. Test the Recliner
Before fully reassembling the chair, test the new pull handle. Sit in the recliner and try reclining. Make sure everything moves smoothly. If you notice resistance or odd sounds, check for loose screws or misaligned parts.
7. Reassemble and Enjoy
Once the handle works, put the chair back together. Replace any padding or covers you removed. Make sure everything looks and feels right.
8. Optional: Add Extra Protection
If your recliner is prone to wear, add some fabric or upholstery tape. It can cover scratches and worn areas, giving your chair extra durability.
Conclusion
Fixing a broken recliner pull handle is easier than you think. With the right tools and a bit of patience, you can handle the repair yourself. You’ll save money on professional fees and feel accomplished in bringing your recliner back to life. Now, sit back, relax, and enjoy your fully functional recliner!
For more services or product details, please contact us
