Shower Door Seals and Sealing Strips Manufacturer
Review shower door sealing strips for the gaps in your door layout. Match the profile to the glass thickness, gap position and door movement. For a replacement review, provide an end view of the old seal and measured dimensions. LOIRE can check the requested profile before confirming a suitable specification.
Wholesale Shower Door Seals and Sealing Strips FAQ
How do I measure a replacement shower door seal?
Record the glass thickness, seal length and gap the seal needs to cover. Take a clear end-view photo and measure the profile, including the grip and any sealing lip. Note whether it fits at the bottom, side or meeting edge. Send those details for a profile match review.
Can any U-shaped seal fit the same glass thickness?
No. Glass thickness is only one dimension. Compare the grip, profile depth, sealing lip, door gap and movement with the intended installation. Similar U-shaped profiles can perform different jobs. Confirm the exact section and a sample before ordering a replacement sealing strip.
Can a sealing strip fix every shower door leak?
A sealing strip must match the gap and door layout, but it cannot address every cause of water escape. Review the door alignment, bottom detail, seal position and movement before selecting a profile. Share photos and measurements with LOIRE for product-fit review; installation issues need an appropriate site assessment.
Can I request a black threshold or matching seal profile?
First specify whether you need a flexible seal or a rigid threshold profile. Send the section drawing, material, color or finish, glass thickness and intended position to LOIRE for review. Confirm the exact profile, sample and availability before ordering; a black finish request does not identify a stock product.
What is the difference between a bottom sweep, a side seal and a drip rail?
A bottom sweep helps seal the gap below the door, while a side seal fits a vertical edge. A drip rail directs water toward the shower interior and may be combined with a bottom sweep. Choose the profile for its intended position, gap and door movement, then confirm the LOIRE model.
How should magnetic shower door seals be matched?
Match the profiles to the closed-door angle, glass thickness, gap and opening direction. Check both mating sections and their magnetic orientation so they meet correctly. Confirm the required pair or receiver, then ask LOIRE to review the drawing and availability of a suitable option.
Do shower door sealing strips need adhesive?
It depends on the profile. Push-on designs grip the glass, while adhesive-mounted designs use their specified tape or bonding method. Follow the instructions for the selected model. Do not add silicone or glue to a loose push-on seal without confirming the cause of the poor fit and the approved fixing method.
Can a shower door sealing strip be cut to length?
Some profiles can be trimmed to length. Confirm the cutting method, finished length and any required end details or notches around hinges for the selected model. Shortening the strip is different from trimming its sealing lip. Change the lip only when the model instructions permit it, since this affects sealing contact.
Can the same seal be used on hinged and sliding shower doors?
Not automatically. Hinged and sliding doors have different movement paths and sealing conditions. Check how the proposed seal clears the glass, hardware and threshold through the full opening movement. A profile that fits the glass thickness may still interfere with door operation. Confirm the application for the selected model.
When should a shower door sealing strip be replaced?
Inspect for cracks, torn lips, permanent distortion and loss of grip. A damaged strip that no longer stays in place or makes the required sealing contact should be replaced. Check for rubbing or door alignment problems that could damage the new strip, and confirm the replacement profile before ordering.